Click Here

 

 

The article author is making a number of great points about What Would Cause My Electric Water Heater to Stop Working? in general in this article which follows.

Lots of modern-day residences take advantage of an electrical hot water heater for their heating system, due to its convenience and ease of use. However, just like any other electrical appliances, troubles might emerge with its use, suddenly. It can be truly aggravating to wake up to a cold shower as opposed to a warm one or having your bathroom with water that isn't hot enough or even also warm. Whatever the case may be, hot water heater troubles can be rather stressful. Fortunately, we have actually made a listing of possible solutions to your water heater concerns. There are a variety of elements that could create much of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the trouble is, getting it repaired ought to not pose excessive of an issue if you adhere to these steps:

 

Check Your Power Supply:

As standard as this might seem, it is really needed. Without sufficient power, your water heater will certainly not function. So the first thing to do when your water suddenly retires is to verify that it isn't a power problem. Examine if the fuse is blown out or the breaker tripped. If the breaker is the problem, simply transform it off and on once more. Replace any damaged or worn-out fuse. Check the home appliance with power after these adjustments to see if it's now functioning.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power trouble, then try looking into your heating element if it is still working. Examine each of your heating elements to make sure the problem isn't with any of them. If any one of them is defective, change that component and after that check whether the warm water is back on.

 

Check Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to examine the temperature setups on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the accessibility panel and press the red switch for temperature reset above the thermostat. This need to help warm the water. Turn the circuit breaker back on and also check if the trouble has been fixed.

 

Call A Specialist:

If after replacing all malfunctioning components as well as resetting your temperature level, the water heater still isn't working, you might need to get in touch with a professional plumber for an expert point of view. The problem with your heating unit could be that the cold and hot faucets have been changed or it might be undersized for the quantity of hot water needed in your house. Whatever the instance may be, an expert plumber would certainly help resolve the issue.

 

Verdict

Water heater issues are not constantly significant. Many of them are because of small concerns like a blown fuse or damaged heating element. Replacing the malfunctioning components need to suffice. Nevertheless, if you are still incapable to solve the problem, give a call to your nearby plumber ahead to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I hope you liked our piece about Hot Water Heater Repair. Thanks so much for finding the time to read our blog post. Do you know about someone else who is intrigued by the subject? Feel free to share it. Thanks for your time. Visit us again soon.

Schedule And Pricing